High quality custom made set of handlebar grips (right and left) fits most Harley Davidson motorcycle models with 1" handlebar (year 1981 and up) with or without control switch.
Exclusively made by Dragon Soul Studio billet steel main body and hand tooled leather wrap.
Inner hole diameter: 1 inch
Available in gold (brass), black or polished chrome
Cover: 3mm hand tooled leather
Leather color: tan
Different wrap colors available and matching design solo seat and handlebar rollbag.
Also you can choose your own design and color just send us your enquiry or add a note while checking out.
Custom 1" handlebar dual cable throttle grips set
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. We can accept your return if you contacted us within 14 days of delivery and the item is sent back within 30 days of delivery.
We don't accept cancellations, but please contact us if you have any problems with your order.
The following items can't be returned or exchanged
Because of the nature of these items, unless they arrive damaged or defective, we can't accept returns for:
- Custom or personalised orders
Conditions of return
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
We would like you to enjoy the grips set you bought,
so please follow the instructions below to protect you and others from possible injury.
Throttle Side grip installation
Step 1. Separate the switch housings by removing the screws, but keep them as you will re-use them. Loosen the screws on the brake clamp to separate the switch housing halves.
Step 2. Slide the stock handgrip assembly off the handlebars. Step 3. Slide on the new grip making sure the teeth on the inside of the grip are engaged in the teeth of the sensor, and the flange is seated inside the switch housing.
Step 4. Reassemble the switch housing using the two screws that were removed. Tighten the screws on the brake clamp if they were loosened.
Clutch Side grip installation
Step 1. Remove the clutch side grip.
Step 2. Sand the clutch side handlebar surface with 80-100 grit sandpaper to remove any previous glue or rubber residue.
Step 3. Loosen a bit the screw on the grip.
Step 4. Use the Evo-Stick Impact Instant Contact Adhesive or similar product and squeeze a good amount of glue onto the inner side walls of the grip. Rotate it while applying the glue to distribute it evenly.
Step 5. In one smooth motion slide the grip onto the handlebar into position, but you must work quickly to get the desired position before the glue dries.
Step 6. Once in place squeeze the grip firmly and tighten the screw, but be careful when screwing the bolt try do not strip off the thread.
Dragon Soul Studio Team